Filter
Top Products
67
BT Equinox 1200 – Edition 6 – 28.05.04 – 5757
Select base
You can switch your BT Equinox handset between bases.
You can also set it to automatically select the base with
the strongest signal. The handset must first be registered
with each base individually.
1. Press MENU then scroll to
Registration
and press OK.
2. Scroll to
Select Base
then press OK. The current
base being used is highlighted.
3. Scroll or to select the base you want or
Automatic
to connect to the base with the strongest signal. Press OK.
De-register a handset
Use one handset to de-register another handset from the
same base.
1. Press MENU then scroll to
Registration
and press OK.
2. Scroll down to
De-Register
. Press OK.
3. Enter the system PIN (original setting 0000) then press
OK. The screen lists all handsets registered to the base.
4. Scroll or to select the handset you want to
deregister and press OK.
5. Press YES to confirm or BACK to return to the previous
screen listing the handsets.
Additional handsets and bases
5757 Equinox 1200 UG 28/5/04 10:32 am Page 67