Filter
Top Products
59
BT Equinox 1200 – Edition 6 – 28.05.04 – 5757
Handset priority
Normally, if you have more than one handset registered
to your base, they all ring at the same time. However, you
can set one of them to ring before the others, so that calls
can always be answered at one handset first.
1. Press MENU then scroll to
Base Settings
and
press OK. Press to highlight
Handset Priority
then press OK.
Display highlights
All Handsets
. Press OK to select All
Handsets to make all handsets ring together.
Or
2. Scroll to
Select Handset
and press OK. Scroll or
to the handset you want to ring first. Press OK.
3. Scroll or to select the number of rings at the
handset before the other handsets start ringing. Press OK
to confirm.
Dial mode
Your BT Equinox 1200 is set to Tone dialling. You can
switch to Pulse dialling.
1. Press MENU then scroll to
Base Settings
and press OK.
Scroll to
Dial Mode
and press OK.
2. Press or to highlight
Pulse
or
Tone
and press OK
to confirm.
Base settings
Connecting to a
switchboard/PBX?
For Access code, Recall and Dial
mode settings see, Connecting to
a switchboard, page 78.
5757 Equinox 1200 UG 28/5/04 10:32 am Page 59