Filter
Top Products
19
This feature allows you to make internal calls, transfer external calls and
make conference calls. If the called handset is not answered within 60
seconds, It will stop ringing and the calling one
will return to standby mode.
1. In idle mode, press <C/MUTE>(INT) and all the other registered
handset numbers will display, along with a "9".
2. Enter the number of the handset you want to call, or enter <9> to call
3. The called handset rings. Press <TALK> on the called handset to
establish the internal call.
Note: If only one other cordless handset is registered to the base station,
that cordless handset immediately.
all the handsets.
Find the Handset
You can locate the handset by pressing the <FIND> button on the front of
handset or <FIND> on the base again.
Note: If there is an incoming call during paging, the phone will ring with the
incoming call instead of paging.
You can stop the paging by pressing <TALK>/<OFF>/<C/MUTE> on any
Make an Internal Call
5 Paging and Intercom Use (for multi cordless handset systems)
You can locate cordless handsets from the corded base or from other
cordless handsets, and you can make intercom calls between cordless
handsets, or transfer calls between cordless handsets, or set up a
conference call between two cordless handsets and an external caller,
provided you have more than one cordless handset registered to your base.
Note: You cannot make or receive intercom calls, transfers or conference
5.1
calls with the corded base.
5.2
5.2.1 Intercom
pressing <C/MUTE>(INT) will call
the base station. All the handsets registered to the base will produce the
paging tone and show "PAGING" on the display for 60 seconds.