Filter
Top Products
4.9.2 Store a Redial Number into the Phonebook
1. Follow Steps 1 and 2 in section 4.9.1.
2. Press <MENU/OK> to show ADD TO PB.
3. Press <MENU/OK> and then enter the name you want it to have in the
4. Press <MENU/OK> and then modify the number, if necessary.
5. Press <MENU/OK> to show <MELODY 1>.
6. Press <UP/DOWN> to browse the melody list. The respective melody
will be played when browsing the melody list.
7. Press <MENU/OK> to confirm, and the entry will be stored.
phonebook.
(Note: The selected melody will only be played when you receive a call
if you subscribe to Caller Display and the incoming number matches the
4.9.3 Delete a Redial Number
1. Follow Steps 1 and 2 in section 4.9.1.
2. DELETE.
3. Press <MENU/OK> to confirm, and the entry will be deleted.
4.9.4 Delete All Redial List Entries
1. Follow Steps 1 and 2 in section 4.9.1.
2. Press <MENU/OK> and <UP/DOWN> to select DELETE ALL.
3. Press <MENU/OK> to display CONFIRM?.
4. Press <MENU/OK> to confirm. All entries will be deleted and the display
Using the corded base:
will show EMPTY.
Press <MENU/OK> and <UP/DOWN> to select
1. Pick up the corded handset or press < SPEAKER> on the corded base.
2. Enter the phone number.
4.10 Making a call
4.9.1 Redial a Number from the Redial List
1. In idle mode, press <DOWN/REDIAL> to access the redial list.
Note: If the redial list shows a name, press the < # > key to view the
2. Press <UP/DOWN> to browse the redial list.
3. Press <TALK> / <SPEAKERPHONE> to dial to the selected redial
Note: If there are no numbers in the redial list, the display shows
“
EMPTY
”
.
number.
number of this entry.
17
WARNING: There will be a 3-second delay, after picking up the corded
handset or pressing the <SPEAKER> button, before any digits
period.
stored number.)
will dial out, but any digit keys pressed during this time will still
be detected and the numbers will be dialled out after the delay