Filter
Top Products
MJH; Reviewed:
SPOC 8/4/2011
Solution & Interoperability Test Lab Application Notes
©2011 Avaya Inc. All Rights Reserved.
7 of 47
Sagemcom_SM61
Step
Description
2.
IP network region
Use the display ip-network-region command to view the network region settings.
The values shown below are the values used during compliance testing.
Authoritative Domain: avaya.com This field was configured to match the
domain name configured on Session Manager. The domain will appear in the
“From” header of SIP messages originating from this IP region.
Name: Any descriptive name may be used (if desired).
Intra-region IP-IP Direct Audio: yes
Inter-region IP-IP Direct Audio: yes
By default, IP-IP direct audio (media shuffling) is enabled to allow audio traffic to
be sent directly between IP endpoints without using media resources in the Avaya
Media Gateway. Shuffling can be further restricted at the trunk level on the
Signaling Group form.
Codec Set: 1 The codec set contains the list of codecs available for calls within
this IP network region.
Display ip-network-region 1 Page 1 of 20
IP NETWORK REGION
Region: 1
Location: Authoritative Domain: avaya.com
Name: FAX testing
MEDIA PARAMETERS Intra-region IP-IP Direct Audio: yes
Codec Set: 1 Inter-region IP-IP Direct Audio: yes
UDP Port Min: 2048 IP Audio Hairpinning? n
UDP Port Max: 3329
DIFFSERV/TOS PARAMETERS
Call Control PHB Value: 46
Audio PHB Value: 46
Video PHB Value: 26
802.1P/Q PARAMETERS
Call Control 802.1p Priority: 6
Audio 802.1p Priority: 6
Video 802.1p Priority: 5 AUDIO RESOURCE RESERVATION PARAMETERS
H.323 IP ENDPOINTS RSVP Enabled? n
H.323 Link Bounce Recovery? y
Idle Traffic Interval (sec): 20
Keep-Alive Interval (sec): 5
Keep-Alive Count: 5