Filter
Top Products
MJH; Reviewed:
SPOC 8/4/2011
Solution & Interoperability Test Lab Application Notes
©2011 Avaya Inc. All Rights Reserved.
34 of 47
Sagemcom_SM61
7. Configure Sagemcom XMediusFAX
This section describes the configuration of XMediusFAX. It assumes that the application and all
required software components have been installed and properly licensed. The number of
channels supported by the XMediusFAX server is controlled via an XMediusFAX server license
file. For instructions on sending and receiving faxes, consult the XMediusFAX Administrator
Guide [5] and User Guide [7].
The examples shown in this section refer to Site 2. Unless specified otherwise, the same steps
also apply to Site 1 using values appropriate for Site 1 from Figure 1.
Step
Description
1.
Prepare the fax server for launching the XMediusFAX software
Consult Sagemcom for requirements and instructions.
2.
Launch the Application
On the XMediusFAX server, launch the XMediusFAX application from the Windows
Start Menu. Navigate to Start All Programs XMediusFAX XMediusFAX.
A login screen appears. Log in with proper credentials. Click the OK button.