Filter
Top Products
MJH; Reviewed:
SPOC 8/4/2011
Solution & Interoperability Test Lab Application Notes
©2011 Avaya Inc. All Rights Reserved.
43 of 47
Sagemcom_SM61
Step
Description
11.
Number Pattern Properties
On the Number Pattern Properties screen, configure as follows:
Number Pattern – Set this field to the pattern to match. In this example, the
value of * indicates any dialed number is acceptable.
Peer – Click the Add button. In the Peer Properties window that appears (not
shown), enter the Peer IP Address and Preference value of 1 and click OK. In this
example, only one peer is configured.
Lastly, click OK on the Driver Properties screen shown in Step 10, to accept the
Driver Configuration.