Avaya 6416D+ Telephone User Manual


 
26
Installing the Designation Card
Use the button designation card to write the telephone number, extension,
name, or feature that each call appearance/feature button can access. In order
to help you match the designation cards with the call appearance/feature
buttons on the telephone, the columns of button labels are marked with the
6400 Series multi-line telephone model with which the label can be used.
Below the perforated bottom edge of each designation card is a telephone
number card on which you can write your telephone number or extension.
To label and install the designation card and telephone number card
1. Print the numbers/features on the button designation card that
corresponds with the telephone you are using, and type or write your
phone number or extension on the telephone number card (labeled
Tel no.).
2. Crease the perforated edges of the cards you have filled out and then
tear the button designation strips and the station number card along
the perforations.
3. Place the button designation card and telephone number card under
the plastic card cover on the telephone by doing the following:
The transparent designation card cover is attached to the frame of
the telephone by tabs on the top and bottom of the cover. Remove
the cover by pulling the top tab forward and then lifting the bottom of
the transparent cover from the telephone.
Place the designation card(s) on the telephone and then replace the
transparent cover over the card by inserting the tabs at the bottom
and then pressing the top down until it clicks.
Note: You can order additional designation cards in quantities of 25 cards
and 100 cards per package. Use the following comcodes when you
place your order.
25 sheets of designation and telephone number cards:
Comcode: CC847984614
100 sheets of designation and telephone number cards:
Comcode: CC847984622