Avaya 6416D+ Telephone User Manual


 
23
and slide it toward the top of the telephone. (See b in Figure 7.)
Rotate the hook 180 degrees (as in c in Figure 7) and then slide it
back into its slot so the bottom part now sticks out from the top. (See
d in Figure 7.) Snap the hook firmly into place.
FIGURE 7 Removing, Rotating, and Replacing the Handset Retainer
3. Place the telephone face down on a flat surface.
4. Remove the desktop stand which is attached to the base of the
telephone by tabs on the top and back of the stand, shown as 2 and 7
in Figure 6 on page 21.
Note: Figure 8 below shows the removal of the desktop stand from
two different 6400 Series telephone models. Check to see
which model is most like the back of your telephone.
Press inward on the top of the stand until you can lift the upper tab(s)
of the stand (shown as 1 in the figure below) out of the tab slot(s)
(shown as 2 in the figure below) on the telephone.
Lift the bottom of the stand out of the lower tab slot(s).
FIGURE 8 Removing the Desktop Stand
¾
a.
b.
c.
d.
2
1
2
1
2
2