Filter
Top Products
Page 48 - Function Key Features Function Keys
Page 48 - Function Keys IP Office (R3.0) 5620SW + EU24 User’s Guide
Function Key Features 40DHB0002USEP – Issue 1 (13th January 2005)
Park - Call Park to Other Extension (!)
Allows a call to be parked against another extension. Depending on the other
extension's type, its parked call indication is triggered. Parked calls are retrieved with
the Ride function (see page 52).
This function can be programmed with or without a target extension number. This
function can be programmed through the phone by the user using an
Admin key.
If programmed with a number, the
Park key displays that number. After answering
a call, pressing
Park parks the call against that extension.
If programmed without a number, after pressing
Park the target for the parked call
must be entered.
The parked call is assigned a number based on the parking extensions number. For
example, extension 290's first parked call is numbered 2900, it’s next 2901 if 2900 is
still parked and so on. If not retrieved elsewhere, a parked call will recall to the parking
extension after a set time.
[User | Digital Telephony | Emulation | Call Park to Other Extension]
See also:
• CPark - Call Park (!) on page 34.
• Park - Call Park to Other Extension (!) on page 48.
• Ride - Ride Call on page 52.
PCall - Priority Call
Call a specified target extension even if that extension is set to 'Do not Disturb'.
This function can be programmed with or without an extension number being specified.
If programmed with an extension number then the target extension is shown next to
PCall. If programmed without an extension number then the user has to enter the
extension number when
PCall is pressed
This function cannot be programmed through the phone by the user.
[User | Digital Telephony | Advanced | Call | Priority Call]
PhyEx - Dial Physical Extension by Number
Dial a specified extension regardless of the current logged on user at that extension
and any forwarding, follow me and do not disturb settings applied by the extension
user.
This function requires the target extension number to be specified when programmed.
The target extension is then shown next to
PhyEx. This function cannot be
programmed through the phone by the user.
This function is currently only available on US based systems.
[User | Digital Telephony | Dial | Dial Physical Extension by Number]