Filter
Top Products
Application Options Changing the 5620 Options - Page 23
IP Office (R3.0) 5620SW + EU24 User’s Guide Changing the 5620 Options - Page 23
40DHB0002USEP – Issue 1 (13th January 2005) Application Options
Display Call Timers
This action controls whether the duration of the current call is displayed or not. If set to
Yes, the duration of the current call is displayed on the call appearance key. If set to
No, the call duration will not be displayed.
To change the Display Call Timers status:
1. Press
Options, Applications Options, and then select the Display
Call Timers? feature button. It will toggle between Yes and No.
2. Select
Save.
(To restore the previous setting without changing it, press
Cancel.)
After saving or canceling, the first Options main screen is displayed.
Message Display Rate
When the IP Office sends messages to your phone that are longer than the display
area, the first part of the message is presented for a specific time interval. The second
part of the message is then displayed for a specific time interval. The Message Display
Rate can be either Fast (display interval is 2 seconds) or Slow - default (display
interval is 3 seconds).
To change Message Display Rate:
1. Press
Options, Applications Options, and then select the Message
Display Rate feature button. This will toggle between Fast and Slow.
2. Select
Save.
(To restore the previous setting without changing it, press
Cancel.)
After saving or canceling, the first Options main screen is displayed.
Visual Alerting
When this option is set to Yes (the default), your phone rings and your voice message
indicator light flashes to alert you to an incoming cal. When set to No, ringing is the
only notification of an incoming call.
To change Visual Alerting:
1. Press
Options, Applications Options, and then select the Visual
Alerting feature button. It will toggle between No and Yes.
2. Select
Save.
(To restore the previous setting without changing it, press
Cancel.)
After saving or canceling, the first Options main screen is displayed.