Filter
Top Products
Page 34 - Function Key Features Function Keys
Page 34 - Function Keys IP Office (R3.0) 5620SW + EU24 User’s Guide
Function Key Features 40DHB0002USEP – Issue 1 (13th January 2005)
ClrCW - Clear CW
Clears the current connected call and connects any waiting call. This feature is not
applicable when working with multiple Call Appearance lines.
This function does not require any data entered when programmed. This function
cannot be programmed through the phone by the user.
Pressing
ClrCW disconnects the extension's current call and connects any waiting
call.
[User | Digital Telephony | Advanced | Call | Clear CW]
CnfRV - Conference Meet Me
Allows the extension to join a specified conference.
This function requires the conference number to be entered when programmed. That
number is then shown next to CnfRV. This function cannot be programmed through the
phone by the user.
Pressing
CnfRV places the extension into the specified conference. Note that the
number of conference parties allowed at any time is determined by the telephone
system.
[User | Digital Telephony | Advanced | Call | Conference Meet Me]
Conf+ - Conference Add
Places all calls held by the extension into a conference.
This function does not require any data entered when programmed. This function
cannot be programmed through the phone by the user.
Pressing
Conf+ places the extension and any calls it has put on hold into a
conference. This function will not work if the extension has a current call.
[User | Digital Telephony | Advanced | Call | Conference Add]
CPark - Call Park (!)
Park the current call.
This function can be programmed with or without data. This function can be
programmed through the phone by the user using an
Admin key.
If programmed with data, the number entered is shown next to the
CPark key and
is the number assigned to the parked call.
If programmed without data, the key displays just CPark. Calls parked using this key
are is assigned a number based on the parking extensions number. For example,
extension 290's first parked call is numbered 2900, its next 2901 if 2900 is still parked
and so on. If calls are parked using this key, CPark is shown with a
symbol. Pressing
the key again displays the user's parked calls and allow them to be retrieved. Parked
calls are retrieved with the Ride function (see page 52).
If not retrieved elsewhere, a parked call will recall to the parking extension after a set
time.
[User | Digital Telephony | Emulation | Call Park]
See also:
• Park - Park (#) on page 47.
• Park - Call Park to Other Extension (!) on page 48.
• Ride - Ride Call on page 52.