Avaya 5420 + EU24 Telephone User Manual


 
Page 48 - Function Key Programming Function Keys
Page 48 - Function Keys IP Office 5420 + EU24 User’s Guide
Function Key Programming 40DHB0002UKEG – Issue 4 (9th February 2004)
Rely- - Relay Off
Switch the specified external output relay (1 or 2) off.
This function requires the relay switch (1 or 2) on the telephone system to be entered
when programmed. This function cannot be programmed through the phone by the
user.
Pressing
Relay switches the specified relay off.
[User | Digital Telephony | Advanced | Relay | Relay Off]
Resum - Resume Call
Resume a call previously suspended into a specified ISDN exchange slot. This function
is not supported in the USA.
This function requires the exchange slot number to be specified when programmed.
The slot number is then shown next to
Resum. This function cannot be
programmed through the phone by the user.
Pressing
Resum resumes any call previous suspended into the specified exchange
slot. Suspended calls can be resumed by any extension.
[User | Digital Telephony | Advanced | Call | Resume Call]
See also:
SusCW - Suspend CW on page 50.
Suspe - Suspend Call on page 50.
Rtriv - Retrieve Call
Retrieve a call previously held into a specified ISDN central office slot and is only
supported if the central office provides a Q.931 hold facility. This function is not
supported in the USA.
This function requires the central office slot number to be specified when programmed.
The slot number is then shown next to
Rtriv. This function cannot be programmed
through the phone by the user.
Pressing
Rtriv retrieves any call previous held into the specified central office slot.
Held calls can only be retrieved by the extension that put the call on central office hold.
[User | Digital Telephony | Advanced | Call | Retrieve Call]
See also:
Hold - Hold Call on page 41.
Ride - Ride Call
Unpark a parked call from a specified system park slot.
This function requires the park slot number to be specified when programmed. The slot
number is then shown next to
Ride. This function cannot be programmed through
the phone by the user.
Pressing
Ride unparks any call previously parked into the specified system park
slot by the same or another extension.
[User | Digital Telephony | Advanced | Call | Ride Call]
See also:
CPark - Call Park (!) on page 32
Park - Park (#) on page 44.
Park - Call Park to Other Extension (!) on page 44.