Filter
Top Products
The Wireless Phone
3600 Series Wireless User Guide Page 5
IP Office [15-601104] Issue [1] (1 June 2006)
5. Select:
Enables you to activate functions from the menu display.
6. Down:
To decrease the speaker and/or ring volume of your phone, press the Down button whilst the
phone is in use. You can also press Down to navigate menu items.
7. Softkeys:
Used to navigate to or initiate certain features as well as control certain actions within the
features. These softkeys correspond to the text prompts in the display screen immediately above
them.
8. Power On/Start Call:
Used to turn your phone on or start a call. Press and hold Power On until two chirps sound
(approximately one second)and then release the key. The in-service tone is heard and your
extension number is displayed. The phone is now on standby mode. To make and receive calls,
press Power On again.
9. FCN:
Used to display the Standby menu, enabling you to set various preferences such as system
information and ring options. When in standby mode (on, but not in use), press and briefly hold
FCN to display the Standby menu.
10. |||| Charging Contacts:
Provides a contact between your phone and a charger when your phone is placed, facing
forward, in a charger.
11. Headset Jack:
Provides a port for connecting a headset and is located on the bottom of the phone.
12. LINE:
If multiple lines are available, your phone system may require you to select a line before dialing a
number. Press LINE and the number key of the line you wish to use. A dial tone is heard.
13. MENU:
This button is unavailable.
14. Power Off/End Call:
Used to turn your phone off. Press and hold Power Off until one chirp sounds. The phone turns
off. Your phone cannot be directly turned off during a call. End the call first and then turn the
phone off.
15. Softkey Function Display Area:
The information displayed varies according to the corresponding softkey pressed. The five
softkeys are Transfer, Conference, Hold, Mute and Redial. Press the left or right side of the key
to activate the corresponding softkey feature. See Using the Softkeys.
16. Shortcut Menu and Main Display Area:
The Shortcut Menu lists the feature shortcuts and descriptions. When in standby mode (on, but
not in use), press and briefly hold FCN to display the Standby menu.
17. Battery:
Indicates the amount of charge remaining in the battery pack. The level indications are
approximations of the remaining battery pack life, they do not indicate equal amounts of battery
pack life. When only one level remains, the battery pack needs to be changed.
Battery Low - This message is displayed and an alarm sounds when the phone is in standby
mode and the battery pack is critically low. The phone cannot be used until the battery pack is
charged.
Backlight:
The backlight comes on when any key is pressed or when there is an incoming call and stays on
for ten seconds. It turns off after ten seconds if another key is not pressed within that period.