Filter
Top Products
User Preferences
3600 Series Wireless User Guide Page 19
IP Office [15-601104] Issue [1] (1 June 2006)
Auxiliary Ring 1 and 2
The Auxiliary Ring 1 and 2 options are designed to be utilized by OAI applications, enabling you to set a
distinctive ring for these applications. Select the desired Auxiliary Ring.
Phone Options
The phone options allow you to set the phone for five separate functions; Noise Mode, Key and
Warning Tones, Display Contrast and Keypad Autolock.
Noise Mode
The Noise Mode option enables you to adjust your phone to account for the noise level in your
environment. Select from:
Normal: For most office environments.
High: For moderate background noise.
Severe: For extremely noisy conditions.
Note
Unless you are in a loud environment, using High and Severe Noise Modes is not recommended
as you may find it difficult to be heard on your phone.
Key Tones
When you press the keypad, Key Tones are played. Key Tones are enabled by default and can be
disabled, if required.
Warning Tones
Warning tones are played to alert you to various conditions, such as out of range, system up or down
etc. Warning Tones are enabled by default and can be disabled, if required.
Display Contrast
You can adjust the display for different lighting conditions.
To set the contrast , press Up or Down (on the left side of your phone) until the desired contrast is
displayed and then press OK. The minimum value is 30 and the maximum value is 83.