Filter
Top Products
3600 Series Wireless Phone User Guide
3600 Series Wireless User Guide Page 18
IP Office [15-601104] Issue [1] (1 June 2006)
Telephone Ring
The telephone ring option enables you to set a distinctive ring style, volume and sequence. You can
select from audible ring, vibrate-only ring or vibrate ring along with/or followed by an audible ring.
Ring Cadence
The cadence is the rhythm of the ring. It can be set to a pre-programmed ring or set to a obtain its
cadence from the PBX. The PBX option is designed to utilize any distinctive rings sent by the PBX while
allowing you to set unique rings for auxiliary applications.
Off: Silent
PBX: Determines the ring cadence. For example, the PBX may send rings to differentiate
between internal and external calls.
Continuous: Rings continually until answered.
Short Pulse: Rings in short bursts.
Long Pulse: Rings in long bursts.
Ring Tone
Play enables you to preview the Ring Tone before selecting. If Ring Cadence is turned off, the Ring
Tone option will not appear on the menu. You can select from five available tones.
Ring Volume
The graduated volume bar indicates the volume levels. You can override this setting by adjusting the
volume whilst the handset is ringing:
To select a volume level, press Up or Down (on the left side of your phone) and then press OK.
Note
If Ring Cadence is turned off, the Ring Volume option is not displayed.
Vibrate Cadence
The Vibrate Cadence options are exactly the same as the Ring Cadence options.
Ring Delay
The Ring Delay option determines how long the Vibrate Cadence will play for before the audible ring
starts. If the Ring Cadence or Vibrate Cadence is turned off, the Ring Delay option will not appear on the
menu.
Select the desired length of Ring Delay:
No Delay: The audible ring starts as soon as the phone starts to vibrate.
5 Second Delay: The phone vibrates for five seconds before the audible ring starts.
10 Second Delay: The phone vibrates to ten seconds before the audible ring starts.