Filter
Top Products
Basic Operation
3600 Series Wireless User Guide Page 10
IP Office [15-601104] Issue [1] (1 June 2006)
Basic Operation
Turning the Phone On/Off
To turn the phone on:
Press and hold Power On/Start Call until two chirps sound (about one second).
The in-service tone sounds and the extension number is displayed. The phone is now in standby
mode, ready to make and receive calls.
To turn the phone off:
While in standby mode, press and hold Power Off/End Call until one chirp sounds. The
phone turns off.
The phone cannot be directly turned off during a call, you must end the call first and then turn the
phone off.
Answering Calls
Your phone will ring or vibrate to alert you to an incoming call. Additionally, a line number on the display
may flash. The display may also show information about the call, such as the caller's name and
extension.
To answer a call:
1. Press Start Call and hold the earpiece to your ear and speak.
2. When the call is finished, press End Call.
To answer a call via the headset:
1. With the headset plugged in to the phone, press either Start Call, 0-9, * or #.
2. When the call is finished, press End Call.
Notes
It is not necessary to unlock your phone to answer a call.
If you are on a call and hear subdued ringing, a call is on the second line. The line number on the
display may be flashing.
To answer an incoming call whilst on a call:
1. Put your first call on hold by pressing the Hold softkey.
2. Press LINE and then press the line number of the second call.
3. When the call is finished, press End Call.