Filter
Top Products
Display Keys Page 53
2420 User Guide Page 53
IP Office 40DHB0002USEG - Issue 1 (29/04/2003)
VMCol - Voicemail Collect
Accesses a specified voicemail mailbox to collect or leave messages.
This function requires entry of the target mailbox name prefixed by either ?
to collect messages or # to leave a message. If just ? or # is entered then
the calling extension's mailbox is assumed. This function cannot be
programmed through the phone by the user.
The
VMCol key appears followed by the mailbox name.
[User | Button Programming | Advanced | Voicemail | Voicemail Collect]
VMOff - Voicemail Off
Switches voicemail for the extension off.
This function does not require any data entered when programmed. This
function cannot be programmed through the phone by the user.
The VMOff key switches voicemail operation for the extension off.
[User | Button Programming | Advanced | Voicemail | Voicemail Off]
VMOn - Voicemail On
Switches voicemail for the extension on/off.
This function does not require any data entered when programmed. This
function cannot be programmed through the phone by the user.
The VMOn key toggles voicemail operation for the extension on/off.
When voicemail is on, VMOn is shown with a
symbol.
[User | Button Programming | Advanced | Voicemail | Voicemail On]
WUTim - Set Wrap Up Time
Sets the extension's busy wrap up time to be inserted between calls.
This function requires the time in seconds to be entered when
programmed. The value is shown next to WUTim. This function cannot be
programmed through the phone by the user.
Pressing
WUTim sets the extension's busy wrap up time to the
indicated number of seconds. This time is used to set a delay between
ending one call and the next call ringing the extension (the waiting call may
be indicated on the display however).
[User | Button Programming | Advanced | Set | Set Wrap Up Time]
See also:
• "NATim - Set No Answer Time" on page 43.