Filter
Top Products
Display Keys Page 44
2420 User Guide Page 44
IP Office 40DHB0002USEG - Issue 1 (29/04/2003)
Park - Call Park to Other Extension (!)
This function requires entry of a target extension number when
programmed. The
Park key displays that number. This function can be
programmed through the phone by the user using an
Admin key.
If after answering a call,
Park is pressed, the call will be parked and,
depending on the extension type, the target extension's parked call
indication triggered.
The parked call is assigned a number based on the parking extensions
number. For example, extension 290's first parked call is numbered 2900,
its next 2901 if 2900 is still parked and so on.
If not retrieved elsewhere, a parked call will recall to the parking extension
after a set time.
[User | Button Programming | Emulation | Call Park to Other Extension]
See also:
• "CPark - Call Park (!)" on page 29.
• "Park - Park" on page 43.
• "Ride - Ride Call" on page 49.
PCall - Priority Call
Call a specified target extension even if that extension is set to 'Do not
Disturb'.
This function requires the target extension number to be specified when
programmed. The target extension is then shown next to
PCall. This
function cannot be programmed through the phone by the user.
[User | Button Programming | Advanced | Call | Priority Call]
PhyEx - Dial Physical Extension by Number
Dial a specified extension regardless of the current logged on user at that
extension and any forwarding, follow me and do not disturb settings applied
by the extension user.
This function requires the target extension number to be specified when
programmed. The target extension is then shown next to
PhyEx. This
function cannot be programmed through the phone by the user.
This function is currently only available on US based systems.
[User | Button Programming | Dial | Dial Physical Extension by Number]