Filter
Top Products
Additional call features
169
To use Automatic Preselection (Meet-me page):
To use Automatic Post-selection:
The called party is either busy on the IP Deskphone or away from their
desk. To page the called party, you do not need to redial the number of
the called party.
1. Lift the handset.
2. Dial the Radio Paging Access FFC.
The paging tone sounds (two beeps
followed by a dial tone).
3. Dial the number of the party you want to
page. After dialing, the ringback tone
sounds.
The paged person can use any IP
Deskphone to enter a Radio Paging
Answer FFC, plus their own DN
number.
4. If your call goes unanswered for a preset
time period and a 15-second high-
pitched tone sounds followed by silence,
press the Goodbye key or replace the
handset.
1. Press the Radio Page soft key. A
special dial tone sounds.
or
(Goodbye)
RadPag