Filter
Top Products
While on an active call
136
Using Attendant Recall
Use the Attendant Recall feature to contact an attendant during a call and
to connect the caller to the attendant.
To contact the attendant while on a call:
Using Call Park
Use the Call Park feature to hold temporarily (park) and retrieve a call
from any IP Deskphone. Using Call Park does not tie up a line. When
configured network-wide, Call Park can be used across networks. A
System Park extension can be configured to automatically park most
calls.
or
2. Choose one of the following:
— Press the Transfer soft key and
repeat the transfer.
— If the transfer is picked up while you
are on the line, press the Goodbye
key to complete the transfer.
1. Press the Attendant Recall key and
stay on the line until the attendant
answers.
2. Press the Goodbye key. The caller
remains connected to the attendant.
Trans
(Goodbye)
AttRcl
(Goodbye)