Filter
Top Products
Connecting the components
32
1. Remove the stand cover. Pull upward on the center catch as
indicated in Figure 6 on page 32, and remove the stand cover. The
cable routing tracks are now accessible.
Figure 6: Remove the stand cover
2. Connect the global power supply (optional). Connect the global power
supply to the AC adapter jack in the bottom of the phone. Form a
small bend in the cable, and then thread the adapter cord through the
channels in the stand.
Note 1: The Avaya 1120E IP Deskphone supports both AC power
and Power over LAN options, including IEEE 802.3af Power
Classification 3. To use Power over Ethernet, where power is
delivered over the CAT5e cable, the LAN must support Power over
WARNING
Use your Avaya 1120E IP Deskphone with the
approved Avaya AC Adapter (model NTYS17BAE6).