Filter
Top Products
Additional phone features
164
can return to Normal Mode (see “Using Resume Normal Mode” on
page 164) or by waiting for 10 minutes.
Local Mode
If the WAN connection fails, the IP Deskphone loses communication with
the Main Office Telephone Preference Service (TPS). It then registers
with the MG 1000B and receives IP Deskphone services from the
MG 1000B. Features such as Personal Directory, Redial List, and Callers
List are not available when operating in Local Mode. When in Local Mode,
the IP Deskphone displays the message LOCAL MODE.
Using Test Local Mode
Use Test Local Mode to check Local Mode functionality (make and
receive IP Deskphone calls). Test Local Mode is useful when provisioning
has changed for an IP Deskphone on an MG 1000B Controller.
Using Resume Normal Mode
Use the Resume Normal Mode command to return to Normal Mode after
testing survival functionality.
1. Press the Services key.
2. Press the Up/Down navigation keys to
scroll and highlight Test Local Mode.
3. Press the Enter key (the IP Deskphone
resets and registers back to the Main
Office).
(Services)