Filter
Top Products
Commissioning
22
Steps to take
Note: The following steps describe the installation on the operating systems
Windows 2000 and XP. If using another operating system refer to the doc-
umentation of your operating system.
1. Insert the CD (Auerswald Mega Disk) into the CD ROM disk drive.
2. If the CD does not start automatically, click Start and Run.
3. Click Search and open the CD ROM disk drive. Select the autostart.exe
application in the root directory by clicking twice. Click OK.
4. Follow the instructions on the monitor by repeatedly clicking Next and se-
lect the corresponding telephone.
5. Follow the instructions on the monitor and select the COMfortel Set config-
uration software.
6. Follow the instructions on the monitor.
Note: During the installation of the COMfortel Set configuration software,
version 1.9 or higher, standard announcements for different answering
machine functions are copied to the computer in three different languages
(German, English and Italian). These are announcements for call accept-
ance STANDARD.WAV, the announcement for remote access
REMOTE.WAV and the announcement for message forwarding
FORWARD.WAV.
Configuring the Telephone and Answering Machine via the Com-
puter
Note: If you would like to carry out the configuration using the telephone
menu, refer to the User Manual. The User Manual is located on the
Auerswald Mega Disk included in the package under Manuals.
Requirements
✔ COMfortel Set configuration software with version 2.0.08 or higher.
Steps to take
1. Start the COMfortel Set configuration software.
2. Click Options and Interface. Select the port you want to use (for example,
USB for connecting the telephone to the computer).
☞
☞
☞