Filter
Top Products
Programming Numbers (Continued)
Using # as a Character
If you want to use a
“#” as an actual character, you must place
two “#”s in the programmed number.
For example, you may want to program a Call Accountability
feature access code (# # extension), into a REP DIAL button.
You program: # # # #275
This means:
# # 275
Using
#
with Speed Dialing Codes
When you want to have a Speed Dialing code as part of your
programmed number, you should use a
single
“#” for the code.
For example, you may want to program the System Speed
Dialing code “# 100” into a
REP DIAL
button.
You program: # 100
This means:
System Speed Dialing code # 100
Using
#
8 to Start End-to-End Signaling
When you place a
“#8“ in a programmed number, you tell the
system to start end-to-end signaling.
For example, you may want to program both a telephone
number (to be dialed first), and an identification code (that
should be transmitted to the far end) into a REP DIAL button.
You program:
9*5554444**#812345
This means:
9 (1.5 second pause) 5554444
(3 second pause)
(start end-to-end signaling) 12345
Programming Buttons and
Personal Speed Dialing Codes
You can program a maximum of: a 4-digit extension number in a
FLEX DSS button; 25 characters in a Personal Speed Dial code;
and 28 characters in a
REP DIAL button.
(Continued)
63