Filter
Top Products
Inspect
✓
❑
The inspect mode allows you to use your console display to get
the following information:
■
The extension number and associated name for either a call
on hold or a call ringing at a LOOP button.
■
The number of trunks available in a group of trunks
represented by a FACILITY button.
■ The number or code stored on a REP DIAL , LAST # DIALED ,
or
FLEX DSS
button.
■
The name of the feature assigned to any other button.
NOTE:
In the Inspect mode, your console is unavailable to new
incoming calls. You also will
handling procedures (such as
not be able to perform call-
hold, transfer, answering a call,
etc.).
Using Inspect
1
Press
INSPECT
.
2 Press the button
you want to inspect.
Deactivating Inspect
When you do any of the following, you automatically deactivate
the Inspect feature:
1
Press
INSPECT
again;
2
Hang up the handset after being off-hook, lift the handset
after-being on-hook, or press an idle
LOOP
button ;
or
3 Allow the display to be idle for 15 seconds.
28