Filter
Top Products
Park
❑
Parked calls are similar to held calls except that they can be
picked up from any telephone. Any call can be parked on the
SLAC, but only one call can be parked at a time. On the
Selector Console, eight calls can-be
(However, only
outside
calls can be
Console.)
See your System Administrator for
parked simultaneously.
parked on the Selector
Selector Console Park codes.
Parking a Call on the SLAC
1
2
3
4
5
6
Press HOLD .
The light next to the button of the held call blinks.
Press another LOOP button and listen for dial tone.
Dial
❑❑ .
* 5
Listen for confirmation tone and dial tone.
If the call is for someone else, dial or page that person and
identify the extension number where the call is parked.
Hang up.
NOTE:
If the parked call is not answered within a preset
interval (the default time is two minutes), the call will return
to the console on the button where it is held. Answer it as
you would any incoming call.
Parking Calls on the Selector Console
1 Press the Group Select and DXS buttons for one of the
Selector Console Park codes. For example, if one of the
codes is 801, press Group Select button 800 and then press
DXS button 01.
When you do this, the call will be removed from your SLAC.
(Continued)
32