Filter
Top Products
12
Getting started
Mounting bracket procedure
Desktop to wall-mount installation
5. Tilt the top of the bracket away from you until it is resting on the telephoneTilt the top of the bracket away from you until it is resting on the telephone
base. Align the grooves of the bracket with the upper keeper tabs on theAlign the grooves of the bracket with the upper keeper tabs on the
telephone base.
4. Make sure the cords are pointing towards you as shown in Figure 4.
Figure 4. Upper keeper tab location
Upper keeper tabs
6. Slide the bracket away from you
until it clicks into the keeper
tabs. Bundle the telephone line
cord and power adapter cord,
and secure them with a twist tie.
Figure 5. Bracket installation
7. Place the bundled telephone
cord and power adapter cord
under the bracket as shown
below.
Figure 6. Cord bundles