Filter
Top Products
37
Answering system
RECORD
ANNC.
Message playback
Press PLAY/STOP to listen to messages. The
system announces the number of messages, then
begins playback.
If you have new messages, you will hear only the
new messages (oldest first). If there are no new
messages, the system will playback all messages
(oldest first).
Announcements
• When playback begins, you will hear the total
number of messages.
• Before each message, you will hear the day
and time it was received.
• After playing all new messages, you will hear
"End of new messages." You will hear "End
of messages" after the answering system has
finished the playback of all messages. If the
system has less than five minutes of recording
time left, you will hear the estimated time
remaining.
Options during playback
• Press VOL button to adjust the speaker
volume.
• Press SKIP to skip to next message.
• Press REPEAT to repeat the message
currently playing. Press twice to hear previous
message.
• Press DELETE to delete the message being
played back.
• Press PLAY/STOP to stop playback.
Delete all messages
To delete all old messages, press DELETE twice
while the telephone is not in use.
1.
“You have [XX] new
messages and [XX]
old messages”
Number of messages (or during
playback, message number
currently playing).
Message playback begins.
See options at right.
2.
Press PLAY/STOP
to begin or end message
playback.
Press PLAY/STOP
Press PLAY/STOP
to end message
playback.
NOTES:
1. If F and the total
message number is
flashing in the message
window, memory is
full. You will have to
delete some messages
before new ones can be
received.
2. The maximum record
time can be more than
11 minutes.
3. If you receive calls when
the memory is full, the
telephone will ring 10
times, then answer and
announce “Memory is full,
enter the remote access
code.”
4. New (unheard) messages
cannot be deleted.