44
Appendix
CONNECTING...
displays on my
cordless handset
• Ensure that the telephone base is powered up.
• Place the cordless handset in telephone base for one
minute to allow the cordless handset and telephone
base to resynchronize channels.
• Move the cordless handset closer to the base. You
might have moved out of range.
• If the cordless handset is in its base and the charging
light does not come on, refer to The charge light is
off section in this Troubleshooting guide.
• Reset the telephone base. Unplug the unit’s electri-
cal power. Wait for 15 seconds then plug it back in.
Allow up to one minute for the cordless handset and
telephone base to reset.
• Other electronic products can cause interference
with your cordless phone. Try installing your phone
as far away from these types of electronic devices as
possible: wireless routers, radios, radio towers, page,
cell phones, intercoms, room monitors, televisions,
personal computers, kitchen appliances and cordless
phones.
The batteries will
not hold a charge
• Charge the battery in the cordless handset for at
least 16 hours. For optimum daily performance,
return the cordless handset to its base when not in
use.
• You may need to purchase a new battery, please
refer to the Battery section of this user’s manual.
• Your phone might be malfunctioning. Please refer to
the Limited warranty section of this user’s manual
for further instruction.
• If the cordless handset is in its charger and the
charging light does not come on, refer to The charge
light is off in this Troubleshooting guide.
Troubleshooting