Filter
Top Products
Telephone Features Continued
Feature Directions
Range Tone
When you turn this feature on, the handset sounds a
(Handset only) warning tone when it is out of range of the base.
Use the softkeys to select OFF or ON, then press
.
Set Pulse/Tone Set the base to match the kind of dialing service you
(Base only) have—touch tone or dial pulse (rotary). You can set
Pulse/Tone separately for each line. Use softkeys to
select Line 1 or Line 2, then choose PULSE (dial
pulse) or DTMF (touch tone). Press to save.
Keypad Tone If you turn this feature on, the handset or base
sounds a tone every time you press a button.
Use the softkeys to select OFF or ON, then press
.
Contrast You can adjust the display screen contrast level.
There are 15 contrast levels.
Use the softkeys to adjust the contrast, then press
.
Rename You can assign a name to the base or any registered
handset (instead of BASE or HANDSET1, etc.)
Use the dial pad and the chart on page 22 to enter
the new location name, then press to
confirm the new name.
Range Extender Set this feature to ON or AUTO to moderately increase
the operating range or sound quality of your
registered handset(s). Set this feature to OFF to
conserve battery power. You can program this feature
at each handset individually or set all handsets to the
same option from the base.
Use + or - to scroll to the desired setting, then
press .
NOTE: Only one handset can be actively in Range
Extender mode at any time.
NOTE: Press O(CLEAR) on the handset or on the base at any
time during feature setup to return to the previous screen.
OK
SAVE
OK
OK
OK
OK
9
FEATURE SETTINGS
2462_00_1 ATT CIB 1/28 1/28/02 9:52 AM Page 9