Filter
Top Products
2 Attach the base.
Turn the base so the larger end is toward the top of the telephone.
Reattach the base by inserting the tabs into the slots. Push down
on the large end of the base to lock it into place.
3 Connect the line cord(s) to the telephone.
• If you have a two-line jack, use only the line cord with the
clear modular plugs on each end. Plug one end into the jack
labeled L1 OR L1/2 on the back of the telephone.
• If you have two separate jacks, use both line cords. Insert
one end of the cord with the blue plugs into the jack labeled
L1 OR L1/2 on the back of the telephone. Insert one end of
the cord with the clear plugs into the jack labeled L2 on the
back of the telephone.
4 Connect the line cord(s) to your modular jack(s).
• If you have a two-line jack, plug the free end of the line cord
into a modular wall jack. Make sure the cord snaps firmly
into place.
• If you have two separate jacks, plug the free end of the cord
with the blue plugs into the modular wall jack for Line 1.
Plug the free end of the cord with the clear plugs into the
modular wall jack for Line 2. Make sure the cords snap firmly
into place.
5 Connect the handset to the telephone.
Plug the coiled cord into the handset jack on the side of the
phone. Plug the other end of the coiled cord into the handset, and
then hang up.
INSTALLATION
7