AT&T 962 Telephone User Manual


 
TELEPHONE MEMORY
19
This telephone has nine white dial locations (white spaces on the directory
card) and nine gray dial locations (gray spaces on the directory card). Each
location can store up to 24 digits. Numbers stored will not be lost even in
the event of a power failure, and even if you have not installed batteries.
NOTE: You may choose to store emergency numbers in memory
locations.This feature is provided only as a convenience and the
manufacturer assumes no responsibility for customer reliance upon the
memory feature. Programming/testing of emergency numbers should be
performed in the early morning or late evening (off peak) hours.
Storing Numbers in Memory
1 Press P.
2 Enter the telephone number you want to store (up to 24 digits).
3 To enter a space in the number display,use the softkey to select
SPACE when entering the telephone number. If you make a
mistake, use the softkey to select BKSPACE, and re-enter the digit.
4 Press the one-touch (white space) location where you want to
store the number (you will hear a three-beep confirmation tone)
— OR—
Press W and the two-touch (gray space) location.
5 Repeat Steps 2–4 to store another number
— OR—
Press P to exit.