Filter
Top Products
Changing Settings
1 Connect with the answering system.
2 Press * 9. You will hear “To listen to settings, press 9,” followed by
two beeps.
3 Press 9. You will hear the currently selected announcement,
followed by “To select a different announcement, press 6 or 4.”
4 Press 6 or 4 to change the selected announcement. Press 9 to save
the setting.
5 The system announces the current Ring Select setting, followed by
“To change the number of rings or select toll saver, press 6 or 4.”
6 Press 6 to increase number of rings, or 4 to decrease number of
rings. Press 9 to save the setting.
7 The system announces the current Message Alert setting, followed by
“To turn on or off, press 6 or 4.”
8 Press 6 or 4 to change the setting. Press 9 to save the setting.
9 The system announces the current Remote Access Code, followed by
“To select the first digit, press 6 or 4, then press 9.”
10 Press 6 to increase the first digit or 4 to decrease it, then press 9 to
save it. Continue in the same way for the second and third digits.
11 The system announces the Priority Calling Code, followed by “To
select the first digit, press 6 or 4, then press 9.”
12 Follow Step 10 to change the Priority Calling Code.
13 The system announces the current base ringer setting, followed by
“To turn on or off, press 6 or 4.”
14 Press 6 or 4 to change the setting. Press 9 to save the setting.
15 Press 5 to exit the set-up menu.
Reviewing Settings
1 Connect with the answering system.
2 Press 9. The system will announce the current settings.
Exit Remote Access
If you are using a touch tone phone, hang up the telephone. If you are
using the cordless handset, press a.
41
ANSWERING SYSTEM OPERATION
AT CORDLESS HANDSET OR TOUCH TONE PHONE