Filter
Top Products
28
Recording Your General Announcement
1 If the announcement you want to record is the currently selected
announcement (A, B or AO) go to Step 2.
If not, select the announcement by following Steps 1–4 in “Selecting
Your General Announcement,” then go to Step 2 below.
2 Press C.
3 Press A.
4 When the system prompts you, begin recording an announcement.
Your announcement can be up to three minutes long. Speak in a
normal tone of voice, about nine inches from the microphone.
5 When you are finished, press S. The system plays back the
announcement, and the Message Counter displays AP (Announcement
Play). If the announcement did not record successfully, you’ll hear an
error tone indicating you need to record again.
To review your announcement at any time press A.
Deleting Your General Announcement
1 Select the announcement you want to delete.
2 Press A.
3 Press D while the announcement is playing. The system beeps
once while the announcement is deleted.
Caller Specific Announcements
This phone allows you to record up to three announcements that you can
match to: 1) specific incoming caller numbers, or to 2) callers who choose
to block their name and number when calling, or to 3) callers from areas
in which Caller ID information is not transmitted. Callers from the
number(s) you designate will hear your selected announcement, not the
“regular” announcement that other callers hear.
See “Setting Up Caller Specific Outgoing Announcements”.
For example, you could record the following announcement to be
played when you receive a call from your friend’s telephone number:
“Hi. I went to play tennis. I’ll be back around eight o’clock.”
Or, you could record the following announcement to be played to callers
who choose to block their Caller ID information (private calls):
“Hello. You have chosen to block your name and number. Blocked
calls will not be accepted at this number.”
ANSWERING SYSTEM SET-UP