Filter
Top Products
ANSWERING SYSTEM SET-UP
26
Turning the System On/Off
The answering system must be on in order to use any answering system
functions. When the answering system is on, the Message Counter is on
(a steady or flashing display). To turn the answering system on, press
O on the base. The system announces “The machine is on.”
To turn the answering system off, press O again. The system
announces “The machine is off.”
Speaker Volume Control
Press + or - on the base to adjust speaker volume, from 0 (lowest) to
7 (highest). You’ll hear a beep when you reach the maximum or
minimum setting.
About Mailboxes
This answering system offers you two voice mailboxes, providing a
convenient way to share an answering system with other members of your
household or business. Callers using a touch tone phone can select the
mailbox in which their messages will be recorded by pressing 1 or 2
after the system answers the call. Those not using a touch-tone phone, or
those who do not press 1 or 2, can still leave messages which are
automatically recorded in Mailbox 1.
Setting the Clock
You’ll need to set the clock so that it can record the day and time each
message is received.
1 Press C. The Message Counter displays CH.
2 Press L. The current day setting is announced.
3 To change the day setting, hold down n or N
until the correct day is announced. Then release the button.
4 Press L. The current hour setting is announced.
5 To change the hour setting, hold down n or N
until the correct hour is announced. Then release the button.
6 Press L. The current minute setting is announced.
7 To change the minute setting, hold down n or N
until the correct minute is announced. Then release the button.
8 Press L. The new day and time are announced.
To check the clock, press L.