Filter
Top Products
The person to whom the call is transferred hears a distinctive transfer-ringing and
lifts the handset. If the call is not picked up, it returns to the attendant’s phone.
2. With voice announcement. To let the person to whom the call is being transferred
know who’s calling.
To announce a transferred call,
•
touch
Transfer
• touch
Intercom
•
touch the Intercom Auto Dial button (or dial the intercom number)
• make the announcement
• hang up.
The person to whom the call is transferred will hear the announcement and will be
connected to the outside call simply by lifting the handset.
3. With Hold and intercom consultation. This method allows the attendant to
discuss the call with the person to whom it is being transferred.
For instance, someone may want to get a certain file out of the file cabinet before
taking the call. For that matter, the person may not want to take the call at all, or may
want the attendant to advise the caller of something specific. If, for whatever reason,
the call must be discussed before it is passed on, use this method:
• touch
Hold
• touch
Intercom
• touch the Intercom Auto Dial button (or dial the Intercom number)
• discuss the call with the person
• tell the person what line to pick up.
NOTE: If the person receiving the call doesn’t have a button for that line, tell the
person to hangup and then transfer the call to yourself by touching the line button for
the held call and then using the direct transfer procedure described above.
If there’s a second call ringing after you have transferred a call by methods 1,2, 3–just
touch the flashing line button.
INTERCOM AUTO DIAL
You can increase the efficiency of the Transfer feature with Intercom Auto Dial
buttons that allow an attendant to use the button instead of dialing the intercom
number. There should be one Intercom Auto Dial button for each person on the
MERLIN
system. The green light next to the button tells if that person is busy on the
telephone–information an attendant needs when handling incoming calls.
SEND MESSAGE
The attendant can turn on the Message light at phones in the MERLIN system to
let people know they have a message waiting.
To do it, touch
Send Message
and touch the Intercom Auto Dial button for the phone
of the person the message is for. A red light turns on at the attendant voice terminal
next to the Intercom Auto Dial button when the message light is lit at the remote voice
terminal. Repeating the above procedure turns off the message light.
To take full advantage of the Send Message feature, the attendant voice terminal
must be a 34-button deluxe voice terminal.
HEADSET
Finally, an attendant with a heavy call-handling load may find it advisable to use a
headset with the optional Headset Adapter rather than lifting and holding the hand-
set throughout the day.
35