Filter
Top Products
29
CALLER ID OPERATION
Setting Options
Call Log
A number (from 01 to 80)
is assigned numerically in
ascending order for each
incoming call. The most
recent call will have the high-
est number. Only the newest
entry from a telephone
number will be saved. When
the memory is full, the oldest
call information is replaced
by the new incoming call
information.
Review Call Log
The screen displays call informa-
tion for about 10 seconds after it
has been received.
This function can be accessed
regardless of whether the handset
is lifted or not.
1. Press p or q to activate the
call list and display the latest
caller ID entry.
2. Press q once to show the
previous caller ID entry. Press q
repeatedly to scroll through the
call list in reverse chronological
order (from the latest entry to
the earliest entry), or
3. Press p twice when the screen
is in idle mode and it will show
-END OF LIST-. Then press
prepeatedly to scroll through
the call list in chronological
order (from the earliest entry to
the latest entry).
4. At the end of the call list, the
screen displays -END OF LIST-
and begins again.
Display Dial
Dial a displayed
telephone number
when reviewing calls
in call log.
1. Press p or q
until the screen
displays the desti-
nation number.
2. Press DISPLAY
DIAL to make
the call, LIFT
RECEIVER will
be displayed.
3. Lift the handset,
the number shall
be dialed out or
press the CLEAR
key to cancel this
operation.
NOTE:
The display dial fea-
ture cannot be used
to dial PRIVATE or
UNKNOWN calls.