Filter
Top Products
11
INSTALLATION
Desktop Installation
1. Remove the mounting adapter from the
telephone base by pressing down with your
thumbs as indicated by the arrows in the
diagram.
2. Turn the mounting adapter upside down so
that the telephone line cord channel leads the
line out from the top of the telephone base.
3. Replace the mounting adapter by aligning it as
shown. Push it downward with your thumbs
as indicated by the arrows in the diagram and
ensure that it is securely locked into place.
4. Plug one end of the telephone line cord into
the telephone line jack at the bottom of the
telephone base.
5. Thread the cord through the channel and out
of the mounting area as shown.
6. Connect the other end to a modular tele-
phone jack on the wall.