Filter
Top Products
10
INSTALLATION
Telephone Installation
Wall-Mount Installation
1. Make sure mounting adapter
is attached to the bottom
portion of the set, so that the
front of the telephone base will
be about parallel to the wall,
once it is mounted.
2. Plug one end of the telephone
line cord into the telephone
line jack at the bottom of the
telephone base.
3. Thread the cord through the
channel and out of the mount-
ing area as shown.
4. Connect the other end to a
modular telephone wall jack.
5. Mount the telephone on the
wall as shown, then continue
with the steps on page 12 for
Handset Installation.
6. Remove handset cradle tab,
rotate and replace to hold
handset securely in place for
wall mounting (as shown in the
diagrams below).
Line cord
Modular telephone
wall
j
ack
Telephone
line jack