Filter
Top Products
Directory
One-touch dialing
Telephone numbers called most frequently can be
stored in one-touch locations so that they can be
dialed with only one key press.
You can enter three telephone numbers up to 24
digits. There are three (M1, M2, M3) one-touch
keys on your telephone.
To store number in one-touch
1. Press PROG/
MEM.
2. Enter a telephone number (up to 24 digits), or
import one by pressing REDIAL.
3. Press PROG/MEM.
4. Press a one-touch key (M1, M2, M3).
Press to erase numbers if you make a mistake.
Press CID twice to enter a three-second dial-
ing pause. Repeat steps 2-4 to program another
memory location, or press REMOVE to exit with-
out saving the number.
To change numbers
To change a number, follow the above steps 1-4
to enter another number in its place.
To call a number in one-touch
To dial numbers stored in one-touch keys, lift the
handset or press SPEAKER, then press a one-
touch key (M1, M2, M3).
Chain dialing
If the number you want to store in a one-touch loca-
tion is too long, you can split the number and store it
into two or three one-touch keys separately. To dial
the number:
1. Lift the handset or press SPEAKER.
2. Press one-touch keys (M1, M2, M3).
ENTER NUMBER
0
MSG#
5550100_
ENTER LOCATION?
0
MSG#
STORED
0
MSG#
14