Filter
Top Products
INSTALLATION
WALL INSTALLATION
1 Wrap the line cord.
Wrap the line cord around the posts on
the inside of the base. Leave at least 3
inches free at each end of the line cord.
2 Attach the base.
Turn the base so that the larger end of
the base is toward the bottom of the
telephone. Attach the base by inserting
the tabs into the slots. Push down on
the large end of the base to lock it into
place.
3 Connect the line cord to the telephone.
Plug one end of the line cord into the
jack labeled TEL LINE on the bottom
of the phone.
4 Reverse the handset tab.
Hold down the switchhook, and slide the
tab up and out of its slot. Turn the tab
so that the end with the hook is up. Then
insert the tab back into its slot.
5 Connect the line cord to modular jack
and mount the phone on the wall
jack.
Plug the free end of the line cord into a
modular wall jack. Make sure the cord
snaps firmly into place. Place the phone
on the wall jack mounting studs and pull
down until it is securely held.
6 Connect the handset to the telephone.
Plug the coiled cord into the handset jack
on the side of the phone. Plug the other
end of the cord into the handset, then
hang up.
7 Connect the power cord.
Use only the power cord supplied
with your system. If you need a
replacement cord, call 1 800 722-9125.
8 Wait for the system to initialize.
When the system is connected to AC
power, all the indicator lights flash on
and off. The Message Window counts
down from eight to zero.
After the system reaches zero, you can
complete installation by following
instructions in "Setting the Clock."
SETTING THE CLOCK
1 Press C. The time is displayed.
2 Use the keypad to enter the time.
3 Press * for AM or # for PM.
4 Press C. The date is displayed.
5 Use the keypad to enter the date (for
example, press 7 0 7 for July 7).
6 Press C. The year is displayed.
7 Use the keypad to enter the year.
8 Press C. The system announces the
date and time.
SELECTABLE DIAL INFORMATION
This telephone has a push button dial
which will work with tone or dial pulse
(rotary) service. Even when set to dial
pulse service, the phone can be switched
temporarily to tone, for access to services
that require tone signaling, including some
tone-activated computer systems.
Dial Mode Switch
TEL LINE jack
Modular Jack
Standard AC Outlet
Reset Button
Telephone Line Cord
Power Cord
!