Filter
Top Products
❥ The system does not automatically add
"1" and the area code to local long distance
numbers. You cannot dial these numbers
from the display.
CALL MATCH ANNOUNCEMENT
NOT PLAYED
❥ Review the call match number and the
call match announcement.
❥ If the call match feature is set to play
the announcement 1, 2, or 3 times, it turns
itself off after receiving the specified num-
ber of call match calls.
OTHER PROBLEMS
Make sure you have followed all the
instructions in this manual to try to
correct the problem.
If you cannot correct the problem, press the
reset button, located on the back of the unit.
The button is recessed. Use the end of a
paper clip or similar object to press the
button.
If there is a problem with the system,
pressing the reset button will reset the
system, and may delete any messages as
well as your announcements. Record a
new announcement and your system
should be ready to answer calls and record
messages.
If the system is okay, pressing the reset
button has no effect on the answering
system, but will disconnect any call in
progress.
IN CASE OF DIFFICULTY