Filter
Top Products
Terminal Block
Connector
Table 2-1. AT&T PagePal J1 Modular Telephone Jack
Pin
Number
Description
1
Not Used.
2
C1 control input for Dry Loop (Page Port) activation by
closure (may also be used for Ground Start grounding
point).
3 Ring (– polarity is important for Ground Start).
4 Tip (+ polarity is important for Ground Start).
5
C control input for Dry Loop (Page Port) activation by
contact closure.
6
Not Used.
This is a 20 Pin lug less-type terminal block located at J2 (see
Figure 2-1). See Table 2-2 for a contact descriptions.
Factory Test Connector J3 - No user connections
Wall Plug Transformer
-115 VAC, 60 Hz.
— U.L. Listed.
Installation 2-7