Filter
Top Products
4-344-34
4-344-34
4-34
Chapter 4: BIOS setupChapter 4: BIOS setup
Chapter 4: BIOS setupChapter 4: BIOS setup
Chapter 4: BIOS setup
The succeeding items appear when the
Power On By RTC AlarmPower On By RTC Alarm
Power On By RTC AlarmPower On By RTC Alarm
Power On By RTC Alarm
item is set to Enabled.
RTC Alarm Date (Days) [Everyday]RTC Alarm Date (Days) [Everyday]
RTC Alarm Date (Days) [Everyday]RTC Alarm Date (Days) [Everyday]
RTC Alarm Date (Days) [Everyday]
To set the alarm date, highlight this item and press the <+> or <-> key to
make the selection.
RTC Alarm Hour (Hours) [0]RTC Alarm Hour (Hours) [0]
RTC Alarm Hour (Hours) [0]RTC Alarm Hour (Hours) [0]
RTC Alarm Hour (Hours) [0]
To set the alarm hour, highlight this item and press the <+> or <-> key to
make the selection.
RTC Alarm Minute (Minutes) [0]RTC Alarm Minute (Minutes) [0]
RTC Alarm Minute (Minutes) [0]RTC Alarm Minute (Minutes) [0]
RTC Alarm Minute (Minutes) [0]
To set the alarm minute, highlight this item and press the <+> or <-> key
to make the selection.
RTC Alarm Second (Seconds) [0]RTC Alarm Second (Seconds) [0]
RTC Alarm Second (Seconds) [0]RTC Alarm Second (Seconds) [0]
RTC Alarm Second (Seconds) [0]
To set the alarm second, highlight this item and press the <+> or <-> key
to make the selection.
Power On By External Modems [Disabled]Power On By External Modems [Disabled]
Power On By External Modems [Disabled]Power On By External Modems [Disabled]
Power On By External Modems [Disabled]
Allows either settings of [Enabled] or [Disabled] for powering up the
computer when the external modem receives a call while the computer is in
Soft-off mode. Configuration options: [Disabled] [Enabled]
The computer cannot receive or transmit data until the computer and
applications are fully running. Thus, connection cannot be made on the
first try. Turning an external modem off and then back on while the
computer is off causes an initialization string that turns the system
power on.
Power On By PCI Devices [Disabled]Power On By PCI Devices [Disabled]
Power On By PCI Devices [Disabled]Power On By PCI Devices [Disabled]
Power On By PCI Devices [Disabled]
When set to [Enabled], this parameter allows you to turn on the system
through a PCI LAN or modem card. This feature requires an ATX power
supply that provides at least 1A on the +5VSB lead.
Configuration options: [Disabled] [Enabled]