Filter
Top Products
ASUS A8R-MVPASUS A8R-MVP
ASUS A8R-MVPASUS A8R-MVP
ASUS A8R-MVP
2-252-25
2-252-25
2-25
•
For a fully-configured system, we recommend that you use a power
supply unit (PSU) that complies with ATX 12 V Specification 2.0 (or
later version) and provides a minimum power of 400 W.
•
Do not forget to connect the 4-pin ATX +12 V power plug;
otherwise, the system will not boot up.
•
Make sure to connect the EZ Plug™ when using two PCI Express
graphcis card and a 20-pin ATX power supply unit; otherwise, the
system will be unstable.
•
The ATX 12 V Specification 2.0 compliant (400 W) PSU has been
tested to support the below configuration:
CPU: AMD FX-57
Memory: 512 MB DDR (x4)
Graphics card: PCI Express x16 ATI X850
Hard disk: SATA HD (x2)
ATAPI: CD-ROM (x1)
• Use of a PSU with a higher power output is recommended when
configuring a system with more power-consuming devices. The
system may become unstable or may not boot up if the power is
inadequate.
•
If you want to use the ATI CrossFire™ Graphics solution, use a PSU
with 500 ~ 600 W power to ensure system stability.
7.7.
7.7.
7.
GAME/MIDI port connector (16-1 pin GAME)GAME/MIDI port connector (16-1 pin GAME)
GAME/MIDI port connector (16-1 pin GAME)GAME/MIDI port connector (16-1 pin GAME)
GAME/MIDI port connector (16-1 pin GAME)
This connector is for a GAME/MIDI port. Connect the USB/GAME
module cable to this connector, then install the module to a slot
opening at the back of the system chassis. The GAME/MIDI port
connects a joystick or game pad for playing games, and MIDI devices
for playing or editing audio files.
A8R-MVP
®
A8R-MVP Game connector
GAME
+5V
+5V
J2B1
J2CX
MIDI_OUT
J2CY
J2B2
MIDI_IN
J1B1
J1CX
GND
GND
J1CY
J1B2
+5V