Alcatel Carrier Internetworking Solutions One Touch 531 Telephone User Manual


 
67
Problem
Possible cause and
solution
Invalid
number
You tried to make a call
and the call is rejected
by the network be-
cause the network
does not recognise the
phone number struc-
ture or you tried to
store a phone number
that is too long to be
stored in the selected
location or
you tried to move a
phone entry to a loca-
tion that is unable to
receive the phone
number (phone
number too long)
Keypad locked
"Unlock" # to
unlock
A press on any key is
made with keypad
locked.
Low battery!
This text appears when
the battery becomes
too low and the mobile
soon switches off auto-
matically.
Network busy
You tried to make a
call. The call is rejected
by the network due to
congestion problems.
Network not
allowed
When selecting net-
work manual search,
you have selected a
network that rejects
the connection.
New PIN in-
correct. Try
again
Changing PIN: the new
PIN code values differ
(value control).
New PIN2 in-
correct. Try
again
Changing PIN2: the
new PIN2 code values
differ (value control).
Problem
Possible cause and
solution
No action per-
formed
When a copy/move op-
eration is made on
memories but no con-
ditions have been
changed (same memo-
ry, number and name).
No response
You made a call to a re-
mote user and no re-
sponse has been
received.
Not allowed
Your number/character
entry is not allowed.
Not allowed
(fixed dialling)
A call is tried, but can-
celled due to fixed dial-
ling control (the
number dialled does
not match with one of
the fixed dialling num-
bers in memory).
Not Available
There is no more SIM
storage.
Number
changed
The called number has
changed.
PIN blocked
A wrong PIN code has
been entered 3 times.
PIN2 blocked
A wrong PIN2 code has
been entered 3 times.
PUK2 blocked
A wrong PUK2 code
has been entered 10
times.
The SIM services pro-
tected by the PIN2
code have now been
permanently disabled.
Ring volume
Off
The ring volume is set
to 0 (no volume)
Reaching al-
lowed credit!
The cost limit is about
to be reached. The con-
nected call ends auto-
matically when the
limit is reached.