Filter
Top Products
51
Connectivity
Connectivity
Infrared port
The infrared port allows to exchange data
between the mobile and other devices
(provided they have an infrared port).
Thanks to the infrared port you can down-
load or send files such as images for your
wallpaper (see Downloading images via
WAP™ and the infrared port, page 60),
send or receive Vcards,...
To initiate a transfer via the infrared port,
your mobile must be placed facing anoth-
er infrared port before port opening
starts.
Both ports can then be opened and syn-
chronised. The requested transfer can be
performed. Objects (e.g vCards) are trans-
ferred one by one.
Opening the infrared port
Opening the infrared port allows
to receive information via this
port.
Once opened, the infrared port
can be used for any kind of trans-
fer (data, fax, file transfer,...). The
infrared port is automatically
closed after a while.
To open the infrared port,
Items can then be received. When
an item is received, the idle screen
is masked by the new item recep-
tion status.
Closing the infrared port
Closing the infrared port closes all
infrared sessions (OBEX and Ir-
COMM sessions).
To close the infrared port:
Transferring a phonebook card
via the infrared port
You can transfer phonebook
cards via the infrared port:
Connection manager
The Connection manager service manages
and centralises circuit and packet connec-
tion profiles (see WAP™, page 54) for on-
line applications.
Creating a connection profile
Press . Select Connecti-
vity.
Select Infrared port .
Select Open . Confirmation
is displayed. is displayed
on top of the standby display
to confirm the port opening.
1
2
3
Press . Select Connecti-
vity.
Select Infrared port .
Select Close .
Place your mobile opposite
the other device infrared port.
Open the other device infra-
red port.
Select the card you wish to
transfer as explained in sec-
tion Viewing and calling pho-
nebook numbers, page 16.
Select Options . Select
Send by IrDA . The infra-
red port is opened and the
transfer is then performed.
Press . Select Connecti-
vity.
Select Connection
manager .
Select Connection
profiles .
Choose an empty profile
([...]) and select OK .
Choose GPRS connection or
Circuit connection and
select OK .
1
2
3
1
2
3
4
1
2
3
4
5