Alcatel Carrier Internetworking Solutions One Touch 531 Telephone User Manual


 
15
Phone Book
Storing a received number
Numbers stored in the last dialled,
received, unanswered call infor-
mation and SMS message loca-
tions can also be stored into the
phonebook:
Editing a Phonebook or a
SIM name card
From the standby display:
Via the menu:
When modifying a card you can
create a voice dialling pattern (see
Voice dialling page 18). The voice
dialling pattern can only be re-
corded in edition mode.
Recording a Voice dialling pat-
tern:
With a received call, unanswe-
red call or SMS message select
Options .
Scroll down and select
Numbers if the number is
contained in an SMS. The mes-
sage number(s) is/are dis-
played. Choose one if several
numbers are available.
Select Store then follow
the above mentioned proce-
dure to create a phone name
or a SIM name card.
1. While entering a number selecting Clear once dele-
tes the last character. Holding the Clear key deletes
the whole number.
2. The *, +, P (pause), # and _ characters can be
stored as part of numbers.
3. You can use _ (wild card spaces) to store numbers.
When calling a number bearing wild card spaces
select the number from the phonebook, press Ok and
type the number corresponding to the wild card spaces
(=missing figures).
4. If the SIM card or phone memory are full a warning
message is displayed on phonebook selection.
Press to get to the phone-
book.
Scroll down to the card you
want to reach and select
OK .
1
2
2’
!
1
2
Scroll down to the field(s) you
want to modify and amend it/
them. Select Save to
store the changes.
Press . Select Phone
Book.
Select Read .
Select one of the stored cards.
Select Options .
Select View .
Scroll down to the field(s) you
want to modify and amend it/
them. Select Save to
store the changes.
Press to get to the phone-
book.
Scroll down to the card you
want to reach and select
OK or select Options
then select View .
Scroll down to the Voice
dialling field and select
OK . Select New to
record the voice pattern or
Record if a voice pattern
is already recorded and you
want to change it.
Repeat the name until it is
stored (minimum = twice).
Pronounce it as clearly as pos-
sible and in a quiet environ-
ment.
When the voice patterns
match, Stored is displayed.
3
1
2
3
4
5
6
1
2
3