Filter
Top Products
- 35 -
9-2
Program Mode (GH-MK)
1. Menu 1: Select language
Choose language to be displayed on GH-MK.
2. Menu 2: Change ID code
Enter new ID code starting with "∗", then 4-digit number.
(Example: ∗1234)
3. Menu 3: Write in resident information
Register room #s and resident names.
Enter room #s using 1 to 6-digit characters.
Enter resident name (up to 16 characters).
4. Menu 4: Set input timeout timer
Operation Timer: If the operation panel is not operated for a
certain period of time, the system returns to standby mode.
Programmable from 15 to 99 seconds.
Program Timer: If, in Resident Programming mode, the
operation panel is not operated for a certain period of time, it
automatically cancels the programming mode. Programmable
from 30 to 99 seconds.
Call Time: Call from Entrance panel expires in a certain period
of time. Programmable from 30 to 99 seconds.
5. Menu 5: Programming
∗ For the programming procedures, see 9-1.
6. Menu 6: Transfer link information
7. Menu 7: Link check (for maintenance purposes)
∗ An electronic sound will be emitted once if link is normal. If
the link is abnormal, an alarm sound will be emitted.